不銹鋼1.4313是馬氏體級，耐耐磨損性強，熱治療后耐力性好。X3CrNiMo13-4鋼的機穩定性是是因為普通機械性組成中鉬和鎳的高含磷量。這種硬質合金修改劑受限了加劇級碳含磷量的需求——給定酸度比較于奧氏體不銹鋼。似乎鎳含磷量較低，但鎳含磷量約為4%，有效改善了鋼對種種耐磨損環保的抵御力——四次機穩定性。X3CrNiMo13-4鋼顧客可產生高達到300℃在室內溫度下事情的配件上的圖加工和配件上的圖加工，相應爆出在種種耐磨損環保中的配件上的圖加工，同一時間恢復夠的表層生活條件括抗氯化物材質)。QT650.QT780和QT900生活條件下，熱治療后最應交盤鋼材。半產品用做頁巖油產生.化工廠.在冶金材料和綠色能源這個行業，蝸輪機爆出在高柔和高溫下.泵.壓縮成機配件。鋼隱疼合焊接工藝。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50現貨供應EN1.4313馬氏體不銹鋼裝飾管更具熱處理特點（+A）情況下、高頻淬火和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，須要哪有一個一定的要跟的業務說模糊不清哦。